Tinning Flux For Copper Pipe

Assemble the pipe and fitting right up to the stop rotate to spread the.

Tinning flux for copper pipe. The alloy melts and coats the inside of the joint and helps ensure a solder joint that s completely filled and. It contains a bit of powdered metal alloy that is similar to solder. Dip the brush in the tin of flux and coat both sides well with the flux.

This helps solder flow into the joint. In the soldering process heat is applied to the copper joint where the pipe and fitting meet and the gap between the joint is filled with molten metal. A copper pipe is one of the most common materials used to distribute water throughout the home and copper pipes are typically joined to one another using flux and solder.

This guide will help you identify the types of solder available as. How to tin a soldering iron tip or re tin an old soldering iron tip duration. We recommend tinning flux.

Immediately apply flux this should be lead free paste for lead free solder. After a thorough cleaning coat the pipe and fitting with flux before heating the joint. Using this technique you can solder the most difficult pipes like chrome plated and stainless steel.

It cleans tins and fluxes most commonly soldered metals. Tinning powder helps to pre tin pipe. But be careful not to spill flux on the pipe as solder will travel anywhere on a pipe that you apply flux.

The oatey 1 7 oz. Plumberparts recommended for you. Coat the scoured ends of the pipes with tinning flux with a brush and assemble the pipes into the coupler.